Adding Passport to your Casa keyset

Foundation's Passport device is one of several supported hardware devices that you can use as part of your Casa multisig setup.

This article walks through how to add your Passport device to your Casa keyset. 

Passport_v1.1.png

If you haven't unboxed or set up (initialized) your Passport device yet, see our article: Setting up Passport for use with Casa.

Don't have a Passport device, but want one? You can purchase one directly from the manufacturer here.

Adding Passport to Casa

Start by tapping the key in your Casa App that you want to add, then tap "Setup Hardware Key."

93d62482-23a0-4d9e-90bf-d9f78dc4378e.jpg

Next, select "Passport," then tap "Continue."

Screen_Shot_2022-04-05_at_11.19.33_AM.png

Since you've already set up your Passport device, tap "Continue, It's Set Up."

Screen_Shot_2022-04-05_at_12.36.06_PM.png

Next, you'll get a prompt like this, letting you know that Casa App is ready to scan the QR code from your device.

Advanced users have the option to sign using an SD card.

Screen_Shot_2022-03-16_at_1.25.36_PM.png

When presented with the above screen, tap "Continue" to view the QR code.

From your device, do the following:

  1. Scroll to "Manage Account"
  2. Select "Connect Wallet"
  3. Select "Casa"
  4. Use the device's back camera to scan the QR code that Casa App presents to you

If successful, you should get the following message in Casa App: 

Screen_Shot_2022-03-16_at_1.28.52_PM.png

That's it! The next step is to learn how to do a Health Check using your device to ensure that the key is ready and available for use when you need it to sign a transaction in the future. 

For information on how to do a Health Check, see Performing a Health Check with Passport.

Articles in this section

Was this article helpful?
0 out of 0 found this helpful
Share